ban04

Electrochemical Station

Square wave voltammogram.

  • Potentiostat
  • Galvanostat (Model 660C)
  • Potential range: -10 to 10 V
  • Potentiostat rise time: < 1 us
  • Compliance voltage: 12 V
  • 3- or 4-electrode configuration
  • Current range: 250 mA
  • Reference electrode input impedance: 11012ohm
  • Sensitivity scale: 110-12 - 0.1 A/V in 12 ranges
  • Input bias current: < 50 pA
  • Current measurement resolution: < 0.01pA
  • Minimum potential increment in CV: 100 V
  • Potential update rate: 5 MHz
  • Fast data acquisition: 16 bit @ 1 MHz
  • External signal recording channel
  • Automatic and manual iR compensation
  • Flash memory for quick software update
  • Serial port or USB selectable for data communication

Amperometrici-t Curvepic52

  • CV and LSV scan rate: 0.000001 to 5000 V/s
  • Potential increment during scan: 0.1 mV @ 500 V/s
  • CA and CC pulse width: 0.0001 to 1000 sec
  • CA and CC Steps: 320
  • True integrator for CC
  • DPV and NPV pulse width: 0.0001 to 10 sec
  • SWV frequency: 1 to 100 kHz
  • ACV frequency: 1 to 10 kHz
  • SHACV frequency: 1 to 5 kHz
  • IMP frequency: 0.00001 to 100 kHz
  • Automatic potential and current zeroing
  • Potential, current low-pass filters, covering 8-decade frequency range, Automatic and manual setting
  • RDE rotation control voltage output: 0 - 10 V (Model 630C and up)
  • Cell control: purge, stir, knock
  • Maximum data length: 128K-4096K selectable
  • Dimension: 12.5”(W)  11”(D)  4.75”(H)
  • Weight: 15 Lb.